
All
Accessories Page Links Below
Accessories / Air
Cleaners & Filters
/ Air Cond.-Heat Pump Parts / Chemicals /
Furnace
Parts / Thermostats
Now Available
BUY IT
NOW !

at our new online store with Secure Shopping Cart for all items shown
Items
are also Available for Installation in Maryland and surrounding areas

Aprilaire
Model 400 Automatic
Bypass Humidifier
Uses 100% of
Water Entering the Unit !
The
Aprilaire 400 is a computer equipped bypass humidifier that also features
state-of-the-art automatic control. It utilizes an outdoor temperature sensor to monitor even the slightest change in temperature. It can
deliver up to 50% more humidity in comparison to competitive units for maximum
comfort. It can be mounted on either the supply or return duct. It has an
evaporative capacity of .70 gallons per hour and a daily output of 17 gallons
and a maximum capacity of 4000 sq. ft. It includes a solid state humidity
control, transformer, built-in bypass damper, extra water panel and saddle
valve. Electrical rating: 24v-60hz-0.5amp.
* Quickly converts from
automatic to manual mode
* Bypass damper is included
* Easy, Low Maintenance
* Simple 24v power source
Aprilaire
400 - dimensions 15-1/8"H x 14"W x 10-3/8"D - weight 13 lbs. -
Save
Now - Only
$214.00
Extra
Water Panels ( 2 pack ) -
Save
Now - Only
$26.00

Aprilaire
Model 600 Automatic
Bypass Humidifier
An Excellent
Choice for Heat Pump Applications !
The
Aprilaire 600 is a computer equipped bypass humidifier that also features
state-of-the-art automatic control. It utilizes an outdoor
temperature sensor to monitor even the slightest change in temperature. It can
deliver up to 50% more humidity in comparison to competitive units for maximum
comfort. It can be mounted on either the supply or return duct. It has an
evaporative capacity of .70 gallons per hour and a daily output of 17 gallons
and a maximum capacity of 4000 sq. ft. It includes a solid state humidity
control, transformer and saddle valve. Electrical rating: 24v-60hz-0.5amp.
Aprilaire
600 - dimensions 15-1/8"H x 14"W x 10-3/8"D - weight 13 lbs. -
Save
Now - Only
$260.00
Extra
Water Panels -
Save
Now - Only
$17.00

Aprilaire
Model 700 Automatic
Power Humidifier
An Excellent
Choice for Heat Pump Applications !
The
Aprilaire 700 is a computer equipped power humidifier that also features
state-of-the-art automatic control. It utilizes an outdoor temperature sensor to monitor even the slightest change in temperature. The
high-tech humidification system can deliver up to 50% more moisture in
comparison to competitive units. Complementing any HVAC system, the model 700
has an evaporation capacity of .75 gallons per hour and a maximum capacity of
4200 sq. ft. An excellent choice for installation on a heat pump application.
Electrical rating: 120v .8 amp.
Aprilaire
700 - dimensions 16"H x 16"W x 10-3/8"D - weight 20 lbs. -
Save
Now - Only
$278.00
Extra
Water Panels -
Save
Now - Only
$17.00

Skuttle
Model 55UD
Under Duct Flow-Thru Humidifier
Ideal for
Heat Pumps and High Efficiency Heating Systems !
Under
duct flow-thru humidifier is designed to deliver outstanding humidity levels
when used on high efficiency heating systems. Fresh water continuously flows
into the distribution pan where it is dispersed evenly over the entire surface
of the evaporator pad. Although this unit uses the flow-through principle,
Skuttle engineers have reduced water consumption with a 3 gallon per hour
orifice and filter. Tapered sidewalls of the unit allow air to flow through so
that little or no restriction occurs in the heating system to maintain high
efficiency. The cabinet is durable, corrosion resistant, thermoplastic with the
pad housing constructed of durable stainless steel for lifetime service. It has
a daily evaporative capacity of 20 gallons and a maximum capacity of 4762
sq. ft. It includes a humidistat, saddle valve, transformer and hardware.
Skuttle
55UD - dimensions 6-3/8"H x 15-1/4"W x 19-1/2"D - weight 11 lbs.
-
Save
Now - Only
$178.00

Skuttle
Model 60
High Capacity Steam Humidifier
Ideal for
Heat Pumps and High Efficiency Heating Systems !

Ideal for use on heat pumps, electric furnaces, high efficiency
furnaces and furnaces using set-back thermostats. It has its own heating source
and will effectively humidify a home regardless of the low air temperature
within the heating system. The internal water temperature sensing device
operates the fan independent of the heating system. Installation package
includes all adapters and mounting components, humidistat, automatic flush timer
and chlorine removal filters. Relay sometimes required for fan operation is not
included. Electrical ratings: Model 60-1 is for 120v systems and Model 60-2 is
for 220v systems.
Skuttle
Model 60-1+2 - dimensions 7-5/8"H x 12-5/8"W x 12-1/2"D
Skuttle
Model 60-1 - 120v - max. 3095 sq. ft. - weight 14 lbs. - Save
Now - Only
$406.00
Skuttle
Model 60-2 - 220v - max. 4048 sq. ft. - weight 14 lbs. -
Save
Now - Only
$422.00
Skuttle
Model F60-1 - 120v - max. 3095 sq. ft. - weight 19 lbs. -
Save
Now - Only
$438.00
Skuttle
Model F60-2 - 220v - max. 4048 sq. ft. - weight 19 lbs. -
Save
Now - Only
$462.00